You can save money on water heater maintenance and stay safe by learning how to turn a water heater on properly.
You may have a gas or electric water heater in your home. Either way, you can learn how to turn on a water heater without professional help.
You may have the best electric hot water heater. If so, find the circuit breaker switch and turn it on.
If you have a gas heater, you need to learn how to light the pilot. What’s more important than anything is making sure that your heater is full of water before turning it on.
To learn more about the basics of turning on a water heater, continue reading this water heater guide.
How to Turn on a Water Heater Safely
Water heater safety is important. A water heater is a pressure-controlled tank. When you turn a hot water heater on, pressure builds up inside of it.
Unless you’re a trained plumber, you should never install a water heater. If you do it incorrectly, it can overheat.
A buildup of pressure can cause an explosion. The explosion can blast a water heater from a basement and through the roof of a two-story home.
However, this kind of explosion isn’t due to a problem with the gas. An improperly installed water heater can overheat. When it does, the thermal expansion will blow the bottom off the heater.
What you can do safely is maintenance your heater and turn it on if needed. For example, you can make sure that sediment doesn’t build up in the bottom of the tank.
Most manufacturers suggest that you flush your water heater every month. However, many people fail to keep up with this regimen. Of course, you’re not one of those people!
Some manufacturers make it easy. They build water heaters with a self-cleaning feature. The unit stirs up sediment, which helps it flush out the sediment through the pipes.
Turning on a Gas Water Heater
Begin turning on a gas water heater by checking for open water valves or faucets. If any are open, close them.
You may have an open valve or faucet for a few reasons. For example, someone may have bumped into one.
Alternatively, someone may have opened a water valve to let air into the tank. Either way, it’s important to make sure that they’re all closed before you begin.
Now, turn on the cold water supply for the heater. Do not forget this step. You don’t want to turn on and ignite a water heater that’s not full of water.
Now, you’ll need to light the pilot. This step is something else that you don’t want to miss. If you do, you may receive an unpleasant surprise if you jump in the shower without checking.
Finally, you can turn on the gas valve. By now, your water heater should start getting warm.
You should see the burners firing. If not, go to step one and do everything all over again.
If you’re having problems, it’s possible that you missed a step. Alternatively, you may have done everything correctly. If so, you may need to hire a local water heater installer to come and check out your system.
Turning on an Electric Water Heater
If you have an electrical water heater, the process to turn it on is similar to the method used to turn on a gas one. Begin by making sure all the faucets in your home are closed.
If any are open, close them right away. If you miss one, you could ruin your tank or the entire heater.
Of course, you placed a safety tag over the breaker when you turned it off. Now, you’ll need to remove it.
If you do not own the home, the owner of the property may have installed the tag. If it’s your home, it’s important to learn how to use safety tags to prevent electrical shocks.
Now, you can safely turn on your water heater. Flip the breaker, and the tank should start getting warm.
With some electric heaters, you cannot visibly tell whether they’re on or off. Still, you should hear quiet noises coming from the heater that indicates that it’s working.
Alternatively, you may have a tankless heater. Then, the process is very straightforward.
Just flip the breaker. Give it a little while to warm up, then check the temperature – and that’s it.
Taking Care of Your Water Heater
It’s great that you’ve learned how to turn on the water heater. However, you must also learn how to take care of it.
Over time, sediment can build up in your water heater. Residue can decrease the efficiency of your water tank. Sediment can also clog your water lines.
However, you can avoid these kinds of problems. With proper maintenance, you can also increase the life of your water heater.
You should check the pressure relief valve and flush the tank regularly. By developing these habits, you’ll extend the lifespan of your water heater. With minimal effort, you can keep your water heater running efficiently.
Give Your Home the Love It Deserves
Now you know how to turn on a water heater. It’s important that you know how to use the mechanics features of your home to stay comfortable and safe.
Now that you’ve learned how to use a water heater, you’re off to a great start. However, there are a ton more things to learn about when it comes to caring for your home.
From the roof to the garden, there’s always room for improvement. Fortunately, there’s a website that can help.
Bookmark KnockoffDecor.com and visit frequently for the latest cool ideas about showing your home some love.