It’s usually more desirable to buy a product that has everything you require to make it easier to use.
That is the case with this Epoxy-Coat Garage Floor Coating Kit.
Apart from having the necessary materials to make the coating, it also has the tools and accessories that make it straightforward as possible to apply it your floor.
If you purchase an Epoxy-Coat floor coating, then you’re in good hands.
The illustrious company sells its products to various esteemed companies such as NASA, the US Army, Boeing, Caterpillar, Disney, and Ford Motors.
The specific product is referred to as their Standard Full Kit, which can be used to coat a specific concrete floor area within the range of 500 square feet.
It only needs a single coat and is self-drying. With only one set, it can resist oil, chemicals, and hot tires.
Can I Use This Product?
One of the exceptional properties of this epoxy floor coating is that it’s accompanied with everything necessary to apply it.
Therefore, if your DIY knowledge isn’t that good, you don’t have to be bothered or stressed out about what tools you may need.
Generally, this product could be used by either domestic or commercial customers who own a concrete floor that needs re-coating.
Most likely, these floors will be in a small industrial unit, storage area, small shop, workshop, or household garage whose floor needs coating.
What’s Included?
Apart from the water supply that you’ll require to clean up, the Epoxy-Coat Garage Floor Coating Kit is accompanied with all you’ll require to mix and apply a brand-new coating on your particular concrete floor. Below is a complete list:
– 3″ brush
– 9″ roller cover
– Squeegee
– 15″ mechanical mixer
– Measuring stick
– Pair of vinyl gloves
– 0.5 lbs. aluminium oxide non-skid
– Epoxy clean and prep solution
– 12 oz. prep solution
– 1.5 lbs. decorative flake
– 1-gallon Epoxy-Coat activator
– 2 gallons Epoxy-Coat resin
Summary of Properties
As you can see from the list above, this floor coating is an excellent option for first-time users and to those who love simplicity.
The epoxy coating enables protection for your concrete floor once it’s applied.
However, it’s worth noting that it’s also ideal for coating tiled, wood and metal floors, as long as they don’t receive any direct UV exposure.
What’s more, the coating will withstand gas, oil and chemical spillages and it also allows a slip-resistant, unscented surface which can resist hot tires as well.
Its durability shows that it will still be offering similar levels of protection, even in 20 years like it did when it was first applied.
There’s also an Epoxy-Coats’s lifetime guarantee if anything goes awry.
Application
Just like with other jobs which involve mixing chemical solutions or substances and applying them, it’s prudent that you read the instructions keenly, especially those which concern safety and health.
Afterwards, you’ll require to fully ready the existing floor.
It can involve some amount of work such as covering fixed items to prevent them from being marked or splashed, drying, cleaning, removing grease spots, filling in holes, smoothing out bumps, and removing existing coatings.
After you’ve prepared everything, the following basic process could be useful in mixing and applying the epoxy floor coating:
– For 2 minutes, mix the resin in a separate bucket to ensure you get the desired colour
– Pour both the activator and resin into the big mixing bucket, and then mix thoroughly for around 3 minutes
– Drain the bucket onto the floor at the room’s furthermost point
– Using the brush, apply the coating to the bottom of the wall
– Spread the coating throughout the floor by using the squeegee
– Make the coating even and consistent by using the toller
Undoubtedly, the primary benefit of the Epoxy-Coat Garage Floor Coating Kit is the way it’s accompanied with everything you require to use it.
Apart from making it more convenient and more straightforward, it additionally provides exceptional value for money